Xr11 cox remote

Xr11 cox remote DEFAULT

Postaw na profesjonalizm i
bezpieczeństwo

Bezpieczeństwo i profesjonalizm – to dwa słowa które najlepiej określają firmę Agtrans. Lata zebranych doświadczeń pozwoliły nam wynieść oferowane usługi transportowe na najwyższy poziom. Od ponad 10 lat budujemy markę Agtrans w oparciu o wykwalifikowaną kadrę pracowniczą, która spełnia oczekiwania nawet najbardziej wymagających Klientów. Każdym kontrahentem opiekuje się spedytor, który jest do jego dyspozycji 24h/h i zna wszystkie szczegóły łańcucha dostaw.

Przez lata pracy zyskaliśmy liczne grono zadowolonych klientów, którzy doceniają naszą solidność, elastyczność i profesjonalizm. Jesteśmy terminowi, działamy kompleksowo. Dbamy o to by nasza oferta była innowacyjna i dostosowana do potrzeb rynku.

Czytaj więcej

Transport i spedycja

Firma Agtrans specjalizuje się w przewozach ładunków na terenie całej Europy. Jesteśmy sprawdzonym partnerem biznesowym, co potwierdza certyfikat ISO. Przewieźliśmy tysiące ładunków, mamy miliony przejechanych kilometrów na liczniku. Chętnie podzielimy się naszym doświadczeniem by dostarczyć Państwa towary bezpiecznie i na czas.

Chcesz zorganizować transport?

Zrobimy to za Ciebie

  • trasy krótkie i długie
  • przewozy spaletyzowane o ładunku do 24 ton (13,6m x2,7m).
  • do dyspozycji Klientów plandeki i firany
  • uprawnienia ADR
  • indywidualne podejście do każdego Klienta
  • ekspresowa dostawa
  • dyspozycyjność 24h

JESTEŚMY DO TWOJEJ DYSPOZYCJI

Gdzie jeździmy

Działamy na terenie całej
Polski i Europy

Nasza firma specjalizuje się w przewozie ładunków cało pojazdowych oraz drobnicowych na terenie całej Polski i Europy.

Główne kierunki:

Jakość potwierdzona
certyfikatem ISO

O transporcie wiemy wszystko, a nasze usługi odznaczają się najwyższą jakością. Potwierdzeniem naszych kompetencji jest zdobyty certyfikat ISO 9001:2015. Może się nim pochwalić niewielu polskich przewoźników. Dla Państwa to dowód, że nasz system zarządzania spełnia najwyższy standard, odpowiada międzynarodowym normom. ISO 9001:2015 pomaga określić zagrożenia, ograniczyć ryzyko nieprzewidzianych zdarzeń, a przede wszystkim zapewnić terminowość transportu. Trzymanie się procedur sprawia, że zleceniodawca nie ponosi strat. Kompleksowość naszych działań powoduje, że zlecając nam transport lub jego organizacje mogą Państwo spać spokojnie.

Sours: https://agtrans.net/cox-contour-2-xr11rf-xr11-rf-remote-control-p-174930574704/

Cox Contour 2 Voice Remote

URC Support

The Cox Contour Voice Remote offers an enhanced TV viewing experience, offering the ability to search for programs or tune to networks using voice commands.

Features

Voice Control

Discover content by channel, program name, or key words by simply pushing a button and speaking.

Hide Your Cable Box

This remote control is capable of controlling a cable box that is hidden from sight once it has been paired with the box.

Simplified Modeless Control

All keys on the remote are dedicated to controlling your cable box except for the TV POWER, VOLUME, and MUTE, and INPUT keys.

Setup

Step 1: CodeFinder

Step 2: Setup Instructions

TV-Image

Be sure to point the remote at your TV during setup

Step 1:

Press and hold SETUP until the LED turns GREEN

Step 2:

Using the digit keys on the remote, enter the code shown in the CodeFinder on this web page.

Step 3:

Test the remote to confirm that it controls your TV Power and Volume functions as expected. If it does not, try again using the next code listed.

TV-Image

Be sure to point the remote at your Audio Device during setup

Step 1:

Press and hold SETUP until the LED turns GREEN

Step 2:

Using the digit keys on the remote, enter the code shown in the CodeFinder on this web page.

Step 3:

Test the remote to confirm that it controls your Audio Device Volume functions as expected. If it does not, try again using the next code listed

Follow the instructions to pair your Remote for Voice Control.

Be sure to point the remote at your equipment during setup.

Step 2:

Quickset Features

Auto Detection

  • Automatically detects televisions and audio devices connected to a Set-Top-Box and retrieves a complete set of control capabilities for these devices.

Easy Setup

  • Simple out-of-box experience with easy self-setup that automates the detection of connected devices to the Set-Top-Box.

Seamless Control

  • Provides seamless control for televisions and audio devices connected to the Set-Top-Box.

Functions

Power Keys

  • TV POWER turns your TV on and off
  • ALL POWER turns your cable box, TV, and AUDIO DEVICE on and off

Navigation Keys

  • VOICE CONTROL Push to talk: Allows voice commands to find programs and channels
  • CONTOUR/Menu Access Guide, Recorded Programs, On Demand, Apps, Search, and Settings

Other Keys

  • SETUP used for remote control programming
  • TV INPUT used for cycling video inputs on the TV

FAQ

Frequently Asked Questions

Refer the following instructions.

  1. You need to pair your remote with the Set-Top-Box.
  2. Make sure the remote batteries (AA) are installed and your TV and Contour 2 Receiver Box are powered on. Also, set the TV input to correspond with your Set-Top-Box.
  3. Press and hold the CONTOUR button and wait for the remote light to change from red to green.
  4. Then type in the three-digit code on the TV screen. Press OK to complete the pairing.
  5. Once your remote is paired, follow the TV on-screen instructions to set up control for your TV and audio device.

TV, Contour 2 Receiver Box, audio devices.

Your product supports an automatic discovery and set-up flow powered by QuickSet in your Set-Top-Box for most devices. Follow the instructions explained in FAQ: "How do I start using my remote (out of the box)?"

The Contour 2 Set-Top-Box will auto-detect your TV. If auto-detect fails, a CodeFinder tool powered by QuickSet will assist in the setup process. Ensure your TV is on, and follow the steps below to set up your remote. Be sure to point the remote at your TV during setup

  1. Press and hold SETUP until the LED turns GREEN.
  2. Using the digit keys on the remote, enter the code shown in the CodeFinder tool found on this page.
  3. Test the remote to confirm that it controls your TV Power and Volume functions as expected. If it does not, try again using the next code listed.

The Contour 2 Set-Top-Box will auto-detect your audio system. If your audio system not fully detected, a CodeFinder tool powered by QuickSet will assist in the setup process. Turn on your audio device and follow the steps below to set up your remote. Be sure to point the remote at your audio device during setup.

  1. Press and hold SETUP until the LED turns GREEN.
  2. Using the digit keys on the remote, enter the code shown in the CodeFinder tool found on this page.
  3. Test the remote to confirm that it controls your audio device volume functions as expected. If it does not, try again using the next code listed.

This remote comes with volume control defaulted to control volume using your TV.
To change to another device, turn on your audio device and follow the steps below to set up your remote. Be sure to point the remote at your audio device during setup.

  1. Press and hold SETUP until the LED turns GREEN.
  2. Using the digit keys on the remote, enter the code shown in the CodeFinder tool found on this page.
  3. Test the remote to confirm that it controls your audio device volume functions as expected. If it does not, try again using the next code listed.

Follow the instructions to pair your Remote for Voice Control. Be sure to point the remote at your equipment during setup.

  1. Press and hold SETUP until the LED turns GREEN.
  2. Press the CONTOUR button.
  3. Follow the TV on-screen instructions to enter the 3-digit code that appears.
  4. The remote is now paired and voice commands should work when you hold down the VOICE CONTROL key.

Make sure that the battery tab has been removed.

Ensure that your TV is on. Be sure to pair the remote and that you entered the correct 3-digit code when pairing.

To control your equipment, be sure to do the following:

  1. Point the remote at the equipment when using it, making sure that there is a clear line of sight.
  2. The LED on the remote should blink with each keypress. If not, replace the batteries.
  3. The remote needs to be programmed in order to control your equipment.
  4. Follow the instructions in the setup section of this page to manually setup my remote. Or, go to TV on-screen Settings, select Remote Settings, then Voice Remote Pairing, and follow the on-screen instructions to set up control for your TV (or other equipment).

Yes. When the remote is paired to a receiver, you can search TV listings and On Demand, find a recorded show, change channels, set a recording, and more, with just your voice.

Refer the following instructions.

  • Be sure that the remote has been paired.
  • Be sure to hold down the VOICE button while speaking.
  • Release the VOICE button to send the voice command.

This remote uses AA size batteries.

While Heavy Duty batteries will work, alkaline batteries are recommended and will have much longer battery life.

Five blinks means that your batteries are low and need to be replaced soon.

Sours: https://www.urcsupport.com/urc_product/cox-xr11-voice-remote-2/
  1. Xbox sync button
  2. Savage choices game
  3. Digimon lopmon evolution

XR11 Cox or Xfinity Remote Control TV Codes

Goto Programming Instructions

Program XR11 remote:

1.Turn on the TV you are programming.

2. Press and hold the "Setup" button until the status LED at the top of the remote changes from red to green.

3.Type in the 4-digit or 5-digit code listed below using the number buttons. 

4. If the code is entered correctly, the status LED will flash green twice. If the status LED blinks red, then green the code was not entered correctly. Check that you are entering the correct code and try again.

5. Use the remote to operate your TV (use Power, VOL, etc.)

If these steps don't work, try another 4-digit or 5-digit code and repeat the above.

Element TV Remote Codes for XR11 Remote:
13559, 11687, 12964, 12260, 13907, 11886, 11864, 12183, and 10178.

LG TV Remote Codes for XR11 Remote:
12731, 10178, 10856, 10700, 10442, 10017, 12271, 11314, 11032, 11758, 12246, 10032, 11178, 11265, 11993, 11934, 11637, and 11530.

Panasonic TV Remote Codes for XR11 Remote:
11480, 10650, 10051, 11947, 11924, 11310, 10226, 10375, 11410, 11271, 12269, 11919, 11347, 11290, 10178, 10165, 10162, 10250, 11941, 11927, and 12273.

Samsung TV Remote Codes for XR11 Remote:
12051, 12280, 12281, 11903, 11060, 10587, 10329, 10482, 10650, 10814, 10032, 10178, 10030, 12284, 10812, 11632, 10702, 10060, 11959, and 10766.

Sony TV Remote Codes for XR11 Remote:
10810, 11100, 10834, 11685, 11791, 11786, 11400, 11925, 11904, 10011, 11317, and 10353.

VIZIO TV Remote Codes for XR11 Remote:
11758, 12707, 12512, 10864, 10885, 10178, 12247, and 11756.

Sours: https://www.directutor.com/content/xr11-cox-or-xfinity-remote-control-tv-codes
How To Program Xfinity XR11 Voice Remote

How do I program my xr11 remote to my TV? Here is a list of TV codes that will work with the XR11 Cox or Xfinity remote. You will need the remote code for your television, and you will need to understand how to program the XR11 remote. Once you have the TV code, we will show you how to program the XR11 remote to your tv with ease.

XR11 Remote Control TV CodesXR11 Remote Control TV Codes

If you have installed a new TV but you are still using the same XR11 remote control with your cable TV setup, the XR11 remote will not work with the newly installed TV. You won’t be able to turn the TV ON with the XR11 or change the volume of the TV without reprogramming the remote.

Here is the information that will show you how to program your XR11 remote and the TV codes needed to control volume + or – and power ON and OFF on your TV brand using the XR11 remote.

TV brand codes for XR11 remote controlTV brand codes for XR11 remote control

XR11 REMOTE TV CODES:
You will first need to find the remote codes that are for your specific TV manufacturer. Here is a list of the most popular TV brands and the code you need to make your TV work with the XR11 remote.

Element TV Remote Codes for XR11 Remote
13559, 11687, 12964, 12260, 13907, 11886, 11864, 12183, and 10178.

LG TV Remote Codes for XR11 Remote
12731, 10178, 10856, 10700, 10442, 10017, 12271, 11314, 11032, 11758, 12246, 10032, 11178, 11265, 11993, 11934, 11637, and 11530.

Panasonic TV Remote Codes for XR11 Remote
11480, 10650, 10051, 11947, 11924, 11310, 10226, 10375, 11410, 11271, 12269, 11919, 11347, 11290, 10178, 10165, 10162, 10250, 11941, 11927, and 12273.

Samsung TV Remote Codes for XR11 Remote
12051, 12280, 12281, 11903, 11060, 10587, 10329, 10482, 10650, 10814, 10032, 10178, 10030, 12284, 10812, 11632, 10702, 10060, 11959, and 10766.

Sony TV Remote Codes for XR11 Remote
10810, 11100, 10834, 11685, 11791, 11786, 11400, 11925, 11904, 10011, 11317, and 10353.

VIZIO TV Remote Codes for XR11 Remote
11758, 12707, 12512, 10864, 10885, 10178, 12247, and 11756.

Once you have the TV brand remote code, use the step-by-step list below.

HOW TO PROGRAM XR11 REMOTE TO TV:
1 – Turn ON the TV you will be using with the XR11 remote.
2 – Press and hold the SETUP button (bottom left) on the XR11 remote until the LED status light (top of remote) flashes from Green to Red.

XR11 Remote SETUP Button LocationXR11 Remote SETUP Button Location – (Bottom Left)

3 – Using the number pad on the XR11 remote, type in the 5 digit code for your TV. (see popular tv remote codes above)
4 – If the 5 digit code you entered worked, the LED status light will blink Green 2 times. (try using the volume control on the remote to see if the tv functions)
5 – If the 5 digit code you entered did not work, keep trying the numbers in the TV brand code list until you find one that programs the remote to the TV.
Once a successful code is entered, verify that TV power, mute, and the volume + and – buttons function properly.

If you cannot find a code for your brand of TV, use the code search method below.

MANUAL PROGRAM CODE SEARCH YOUR XR11 REMOTE TO YOUR TV:
1 – Turn ON the TV you will be using with the XR11 remote.
2 – PRESS AND HOLD the SETUP button (bottom left) on your XR11 remote until the LED status light (top of remote) flashes from Green to Red.
3 – Begin manual TV code search by entering 991 on the XR11 remote.
4 – The LED status light will flash Green 2 times.
5 – Repeatedly press the CHANNEL UP button on the XR11 remote to search through the TV codes.
6 – Keep pressing CHANNEL UP button on the XR11 remote until the TV you are programming turns OFF.
7 – After your TV turns OFF press SETUP.
8 – The LED status light on your remote should flash Green 2 times.
9 – Press the TV Power button on the XR11 remote and if the TV turns ON, your XR11 remote is programmed.
Be sure to hold the SETUP button until it flashes Green 2 times after your TV turns OFF.

XR11 remote control button identification chartXR11 remote control button identification chart

NOTE:The XR11 voice remote is used with different cable TV providers. Some such providers are COX (Contour) and Comcast (XFINITY). The following information will also work on the X1, XR2, and XR5 remotes.

DOWNLOAD XR11 REMOTE MANUAL HERE

Share this:

Related Posts - Remote Codes

Sours: https://codesforuniversalremotes.com/xr11-remote-control-tv-codes/

Cox remote xr11

.

How To Set Up Your Cox Contour TV Remote

.

You will also be interested:

.



138 139 140 141 142