Oil for 2020 jeep wrangler

Oil for 2020 jeep wrangler DEFAULT

The 2018+ Wrangler JL uses the same 3.6L V6 as the 2012-2018 Wrangler JK. There’s some internal tweaks but on the outside it’s mostly the same. A redesign of the top engine cover makes accessing the filter possible without removing the cover.

What to buy

  • Oil – The JL calls for 5 quarts 0W-20 oil which is usually only available in full synthetic.
  • Filter – The 3.6L uses a filter that loads on the top side of the engine. We used a Fram Extra Guard Oil Filter, CH11665. The Mopar Oil Filter version is MO-349, Part #68191349AB

Tools and supplies

  • 13mm socket
  • 24mm socket
  • Ratchets
  • Oil drain container
  • Rags

How to

The great thing about a Jeep is that usually you can change the oil without needing to raise the Jeep. With the oil drain container under the Jeep use the 13mm socket to remove the drain plug. Allow the oil to drain.

While the oil is draining use the 24mm socket to remove the oil filter, the filter snaps into the cover and will come out with the cover. Pull out the filter from the cover and snap in the new filter. The new filter should come with a replacement o-ring. Remove the old o-ring from the cover and replace it with the new one. Place the assembly back in the engine.

By this point the oil should have drained from the engine. Replace the plug and clean up the area to remove any oil mess.

So with the filter and plug in place remove the oil filler cap and pour the new oil into the engine. Clean any excess and replace the cap. Start the engine and observe oil pressure.

Resetting the oil life indicator

Without pressing the brake pedal press the Start/Stop Engine button to the On/Run position. Don’t start the engine.

Navigate to the Oil Life menu in the instrument cluster display.

Push and hold the OK button until the oil life indicator resets to 100%.

That’s about it

Make sure you dispose of used oil properly.

jeepfan.com 2018 JL Wrangler Unlimited Rubicon

Sours: https://www.jeepfan.com/tech/wrangler-jl-3-6l-v6-oil-change/

A JL 2.0L Jeep Wrangler oil change costs less if you do it your self, no need to pay for the dealer to do it. This is even easier then other JL engines due to the traditional spin on style oil filter. Follow your service schedule to stay on top of maintenance. Use this guide for the 2019, 2020, and 2021 Jeep Wrangler model years when equipped with the 2.0L engine. For an oil change on a JL Wrangler equipped with the 3.6L engine, follow this alternate guide.

Tools Needed:

Parts Needed:

As an Amazon Associate I earn from qualifying purchases.

JL 2.0L Jeep Wrangler Oil Change Procedure:

  • Warm engine to operating temp
  • Check engine oil on dipstick to verify no issues
  • Remove oil drain plug and let oil drain into pan using the 13mm or 1/2″ socket or wrench
  • Remove and replace oil filter (next to oil pan) using the oil filter wrench
  • Reinstall and tighten oil drain plug
  • Fill with 4.5 quarts of engine oil with oil fill funnel and reinstall oil fill cap
  • Start engine to let oil circulate (Check for any leaks or abnormalities while running) and shut engine back down
  • Check engine oil & top off if necessary (make sure vehicle is on level ground)
  • Reset the maintenance reminder
Oil fill cap
This oil pan drain plug and oil filter need to be removed for the 2.0L JL Jeep Wrangler oil change.
Sours: https://theweekendmechanic.com/2019-2-0l-jl-jeep-wrangler-oil-change/
  1. Poe heist
  2. Terraria best modifier
  3. Www advanceamerica com
  4. Anna maria island retreats

What Oil Should I Put in My 2020 Jeep Wrangler?

2020 Jeep Wrangler Oil Change

As all Jeep lovers near Uniontown know, the 2020 Jeep Wrangler is an exceptional off-roading machine that can conquer any terrain. You can always expect impressive performance behind the wheel of the 2020 Jeep Wrangler, but if you want your Wrangler running as it should, you’ll need to change its oil at the designated service interval and top it off as needed. But what oil should you put in your 2020 Jeep Wrangler? Our Chrysler Dodge Jeep RAM dealership has your answer.

Oil Viscosity Weights for the 2020 Jeep Wrangler 2.0L and 3.6L Engines

Depending on your 2020 Jeep Wrangler’s engine, you’ll need to fill it with the appropriate oil. Let’s take a look at exactly what kind of oil the 2.0L and 3.6L engines take:

  • 2.0L Engine:For best performance and maximum protection under all types of operating conditions, the manufacturer only recommends engine oils that are API SN PLUS certified and meet the requirements of FCA Material Standard MS-13340. An equivalent full synthetic engine oil can be used if it meets API SN PLUS Certification. If SN PLUS or equivalent oil is unavailable then please contact your local dealership for recommendations.
  • 3.6L Engine: For best performance and maximum protection under all types of operating conditions, the manufacturer only recommends engine oils that are API Certified and meet the requirements of FCA Material Standard MS-6395.

If you’d prefer to use synthetic oil, it may be used as long as they are of the recommended viscosity weight. Synthetic oil should be used consistently and changed at regular intervals.

Get Your 2020 Jeep Wrangler’s Oil Changed at our Uniontown Area Service Department

When it comes time for your 2020 Jeep Wrangler to have its oil changed, our Chrysler Dodge Jeep RAM service department is here for you. Our certified technicians will work hard to get you back on the road as soon as possible!

If you have any questions about your 2020 Jeep Wrangler’s oil or would like to speak to a service representative, don’t hesitate to contact us at our Chrysler Dodge Jeep RAM dealership near Uniontown today.

2020 Jeep Wrangler Inventory

Sours: https://www.charpercdjr.com/what-oil-should-i-put-in-my-2020-jeep-wrangler/
2020 Jeep wrangler Sahara 2.0 liters turbo OIL CHANGE (1st oil change at 5000KM)

.

Wrangler oil for 2020 jeep

.

2020 Jeep Wrangler Sahara How to Oil change and Oil life reset

.

You will also be interested:

.



671 672 673 674 675