Ecm motorcycles

Ecm motorcycles DEFAULT

BUELL WEBSHOP

21 products found. Go to page:

<< Previous  
1   2   3  
Next >>

   
Buel XB and 1125 2008-2010 ECM with Tune€529,00  Add to cart 
Buel XB and 1125 2008-2010Race ECM with Tune You can tell us what intake, header and exhaust you run, and we program this inside the ECM. TPS zero position must be set after installation note the Model bike , model year, and exhaust in the order commends
   
Buell Race ECM for X1 and S3 models€529,00  Add to cart 
Buell Race ECM for X1 and S3 models You can tell us what intake, header and exhaust you run, and we program this inside the ECM. TPS zero position must be set after installation for off road use only
   
Buell Race ECM for X1 and S3 modelsOn request 
Buell, X1/S3 Race ECM. This ECM comes with a stock calibrated fuel map from Buell. You can ask us to program it for your setup send me a e-mail at: [email protected] This race module provides an advance curve that allows the engine to rev to 6800 RPM. Module designed to work with other race system components to ach...
   
DYNA-2000HD MODULE. SINGLE/DUAL FIRE€259,00  Add to cart 
DYNA-2000HD MODULE SINGLE/DUAL FIRE for XL / tube frame Buell models with 8 pin Deutsch connection as replacement for 31652-96Y or N0306.9A can be used a simple plug in, but also to change to *single spark ignition on your S1,M2 & S3 Carb *( will need a other coil for single spark operation ) Product Overvie...
   
Buel XB 2003-2007 ECM with Tune€529,67  Add to cart 
Buel XB2003-2007 ECM with Tune. You can tell us what intake, header and exhaust you run, and we program this inside the ECM. TPS zero position must be set after installation You can but a Cable to do that HERE
   
Buell, Stock ECM X1 all models€429,00  Add to cart 
Ask us for uptions Buell, Stock ECM X1 all models * please note * Ecm's wil need to be AFV reset and Tps adjusted before you can run it. The
   
BUE2D Firmware reflash 2008-2010 Buell XB and 1125€50,00  Add to cart 
When you have a 2008-2010 model OEM ECM, we can reflash this to the latest BUE2D Dealer EEPROM for you. We charge 50 euro to do this. We have seen broken ECM's burned ECM's we could not save we only know when we receive the ECM and test it here. When you send us your ECM, please put a paper in the box where we...
   
Buell XB9/12 1125R/CR stock flashed ECM 08-10€529,40  Add to cart 
Buell XB9/12 1125R/CR stock flashed ECM 08-10 these ecm come in as blank, contact us to have yours programmed to specific bike model year and make This ECM we flash for you specific Buell Type. This can be all Buell models XB 9 and 12 or 1125 R/CR 2008-2010
   
Buell, Stock ECM X1 all modelsOn request 
Please ask us for replacement Buell, Stock ECM X1 all models * please note * Ecm's wil need to be AFV reset and Tps adjusted before you can run it
   
BLACK XB9-12 stage 1 kit 2008 - 2010 stock headerOn request 
Twin Motorcycles BLACKVERSIONstage 1 kit for EUROPEAN BUELL XB MODELS WITH SMALL stock headers. SOUND CLIP Our stage 1 kit for the XB12 makes between 92 and 96 HP and between 104 and 110 NM of Our stage 1 kit for the XB9 makes between 80 HP and between 85 and 90 NM of Torque. This kit is made because a lot of inter...
Sours: https://www.twinmotorcycles.nl/webshop/products.asp?cid=9631&mc=1
motorcycle-engine-control-unit-ecu

Engine Control Unit- Motorcycle ECU or ECM. The part already been very much known to some of you. But some of you maybe not known enough about the technology and features integrated with the ECU.  So here is today’s feed on Engine Control Unit-Motorcycle ECU or ECM. Let’s get in the details.

motorcycle-engine-control-unit-ecu

You know, these days the roads of Bangladesh becoming so hot as this is 2016. And now there are some performance motorcycles rolling on our road. In terms of technological advancement those motorcycles are fitted with latest features and technologies.

Necessarily these motorcycles come with some hi-tech technical features. So those hi-tech machines which are controlled by electronically programmed digital controlling device that is ECU.

motorcycle ecu

What is Engine Control Unit – ECU or ECM?

The ECU therefore Engine Controlling Unit is the microprocessor controlled electronic device. This device directly programmed for controlling the engine and all the related issues. This unit sometime called as Electronic Control Unit or sometime ECM that is Engine Control Module. This is generally like the brain of an engine therefore the motorcycle.

The ECU directly works for operating the engine. It ensures the optimum performance with optimum efficiency. The ECU works here like a wide range of electronic protocol for operating the engine and other related activities. It also ensures the regulatory activities of the engine.

motorcycle-engine-control-unit-ecu-design

Tasks of Engine Control Unit – ECU

In the regular motorcycles like low capacity or low performance commuter or in air cooled motorcycles there is no ECU or ECM. There the engine activities are controlled mechanically. And sometime with some limited pre-programmed electronic chip like CDI (Capacitor Discharge Ignition) but separately.

The controlling and performance activities are also operated here mechanically. So fuel supply, air fuel mixture, ignition system, temperature control or other activities are also operated separate technology.

On the other side in ECU or ECM operated engine or motorcycle all the tasks related engine operation and performance operated and controlled by ECU microprocessor. Here all the tasks like air-fuel mixture according to throttle & temperature, fuel injection, injection timing, ignition timing, idle speed control, temperature control, emission directly controlled by the ECU therefore Engine Control Unit. In some hybrid machine the valves are also controlled by ECU.

motorcycle-engine-control-unit-ecu-diagram

Features of Engine Control Unit – ECU

You may have already understood the activities of an ECU from our above clause. These days the high performance motorbikes or other engines can’t be operated with optimal performance without support of an ECU. So ECU definitely has some advantages and here are those in bullet:

  • Optimal and précised use of fuel
  • Air-fuel ratio and mixture automatically controlled by ECU considering throttle position, temperature and weather.
  • No need for manual choke operation in cold start.
  • Minimal scope for engine knocking.
  • Ensure maximum performance, optimum fuel efficiency.
  • Control and ensure lower emission.
  • Gives smother and responsive throttle response
  • Controls operating temperature.

fuel-injection-system-controlled-by-ecu

Limitations of Engine Control Unit – ECU

ECU is the most hi-tech addition in modern performance motorcycles. It’s like the brain of an engine or any motorcycle. We have already figured out the features and advantages of the ECU above. But here are the limitations or disadvantages of that. Though we can’t categorize them as disadvantages but here are those. Whatever lets take a look.

  • ECU combines and controls all the task related with engine operation. So there is no way to customize or control any of the operation separately like fuel control or air-fuel mixture tuning except the pre-programmed presets.
  • ECU cannot be modified for further customization. Only Authorized after market ECU can be the solution for further modification.
  • Repair work and tempering is not fruitful on ECU.
  • It’s an expensive device and technology. It makes any bike or engine more costly.

high-performance-engine-control-module-ecm-ecu

New Hi-Tech Engine Control Unit – ECU

The modern performance motorbike comes with some hi-tech and hybrid ECU’s. This ECU comes with some enhanced features. The hi-tech and modern ECU has various presets of various operating mode like economy riding, cruising or high speed racing etc.

Some of the modern ECU’s are also programmable, customizable and upgradeable with authorized software’s.  The Modern ECU also controls the features of ABS (Anti-lock Brake System), traction control, lean control, cruise control, gravity sensor etc.

2015-honda-cbr1000rr-ecu

Engine Control Unit – ECU in Bangladeshi Motorcycles

In Bangladesh we are still far away of modern and hi-tech technologies of motorcycle. Though we are using some top end performance motorcycles in our country within our government applied cc limitation. But we are using the basic features of ECU.

We are still not getting the hi-tech features of the modern ECU operated bikes like customizable or programmable ECU, ABS or traction control features. But hope fully some of us personally importing some hybrid ECU’s for their motorcycles. These ECU’s are featured for high rev mode, lower idle speed, RPM limiter etc.

So hopeful thing is our motorcycling status is changing. We just started tasting the modern technologies. Here we expect for the days when the cc limit will be expand and high rate of taxes with be relaxed. Maybe that time we would taste the world class motorcycles in Bangladesh.

So guys here we are the end of our feed. If you have any question or query on Engine Control Unit-Motorcycle ECU or ECM, feel free to ask or share. Thank you all.

Sours: https://www.bikebd.com/motorcycle-ecu/
  1. Ikea monitor shelf
  2. Flexible tap nozzle
  3. Kahoot quizzes fun
  4. Matlab table

Screamin' Eagle Pro Street Tuner

The Screamin’ Eagle®Pro Street Performance Tuner is designed to simplify management of engine operating parameters as performance modifications are made. Once installed, the kit allows you to adjust key parameters or simply upload the latest Engine Control Module (ECM) calibrations to match your bike’s state-of-tune. Start with a high-flow air cleaner and Street Performance mufflers and upload the calibration that provides the best performance mix. Add additional Stage Upgrades later, and you simply upload the proper ECM calibration to match the model and hardware. Plus, you have free online access to the latest factory calibrations. Ideal for real-world street performance applications, the Pro Street Tuner provides the adjustability to account for bike-to-bike variation and for changes to cams, heads, intake and exhaust while maintaining closed-loop fuel control for fuel economy in the part-throttle operating range. Unlike other aftermarket tuners, The Screamin' Eagle®Pro Street Tuner actually talks directly to your motorcycle’s ECM and re-programs the motorcycle’s operating system. It isn’t a piggyback system that tries to fool the ECM into adding more fuel or changing the ignition timing. The Pro Street Tuner plugs into the bike’s data port, so no splicing or under-seat hardware is required. And unlike other race tuners or engine controllers, the Screamin’ Eagle®Pro Street Tuner does not impact your Harley-Davidson®factory warranty coverage.

• Features a guided Smart Tune process to enable quick navigation through the software, whether new to tuning or an experienced user

• Stores up to 15 minutes of run-time data that can be downloaded to PC, allowing you to view and evaluate the bike’s air/fuel ratio, O2 sensor readings, engine speed and temperature, RPM and vehicle speed, throttle position, spark advance and much more

• Vehicle Communications Interface (VCI) will record and display service codes for troubleshooting and diagnostics

• Smart Tune Live, a dynamic method to track engine data by running vehicle through a range of RPM and throttle positions, reduces time to modify existing Volumetric Efficiency tables (works on models with factory-installed O2 sensors only)

• Adjustability to Spark Advance, Throttle progressivity, and Volumetric Efficiency to custom tune the performance combination

• Includes the Vehicle Communications Interface (VCI) module and unlimited access to the latest software updates and calibrations available from Screamin’ Eagle®, Tuner Cable kit sold separately

• Permits tunability to optimize performance and drivability without compromising fuel efficiency, emission levels, engine durability, or 50-State U.S. EPA compliance

Free web-based training guide can be found at –www.h-d.com/streetperformancetuner

Sours: https://www.harley-davidson.com/us/en/shop/Screamin-Eagle-Pro-Street-Tuner/p/41000008C
💬 How ECUs Work - Technically Speaking

ECM VICTORY MOTORCYCLE 2008 – 2017

ECM 2009 - 2017 VEGAS, HAMMER, GUNNER, JUDGE, HIGHBALL, GUNNER, CROSS COUNTRY, ROADS, VISION, VICTORY MOTORCYCLE

Only 1 left in stock (can be backordered)

Description

FACTORY OEM VICTORY PART

REPLACES 40121574015775 4013160 4012861 4012388 4012157
NEW VICTORY MOTORCYCLE OEM ECM

ASSEMBLIES WHERE 4012157 IS USED

  • 2008 HAMMER ALL OPTIONS (V08HB26/HS26) – Electrical, Switches & Sensors & Components All Options
  • 2008 JACKPOT ALL OPTIONS (V08BC26/XB26) – Electrical, Switches & Sensors & Components All Options
  • 2008 KINGPIN/KINGPIN 8 BALL/KINGPIN TOUR ALL OPTIONS (V08CB26/CD26/PB26) – Electrical, Switches & Sensors & Components All Options
  • 2008 VEGAS/VEGAS 8 BALL/VEGAS LOW ALL OPTIONS (V08AB26/GB26/LB26) – Electrical, Switches & Sensors & Components All Options
  • 2008 VISION ALL OPTIONS (V08SB36/SD36) – Electrical, Switches, Sensors & Components All Options
  • 2009 VISION STREET/NESS/TOURING/10TH ANN. (V09SB36/SC36/SD36/SZ36) – Electrical, Switches, Sensors & Components All Options
  • 2010 VISION TOUR PREMIUM/NESS/8 BALL ALL OPTIONS (V10SD36/SC36/VB36) – Electrical, Switches, Sensors & Components All Options
  • 2011 VISION ALL OPTIONS (V11SW36/SA36/AW36) – Electrical, Switches, Sensors & Components 2 All Options
  • 2016 CROSS COUNTRY 8 BALL ALL OPTIONS (V16DA36) – Electrical, Switches, Sensors & Components 1 All Options
  • 2016 CROSS COUNTRY/TOURING ALL OPTIONS (V16DB/DW/TW36) – Electrical, Switches, Sensors & Components 1 All Options
  • 2016 GUNNER ALL OPTIONS (V16LB36/LW36) – Electrical, Switches, Sensors & Components All Options
  • 2016 HAMMER 8 BALL INTL/HAMMER S ALL OPTIONS (V16HA36/HS36) – Electrical, Switches, Sensors & Components All Options
  • 2016 HIGH BALL ALL OPTIONS (V16WB36/WW36) – Electrical, Switches, Sensors & Components All Options
  • 2016 JACKPOT INTL (V16XB36EU) – Electrical, Switches, Sensors & Components
  • 2016 JUDGE INTL (V16MW36ED) – Electrical, Switches & Sensors & Components
  • 2016 MAGNUM/MAGNUM X-1 ALL OPTIONS (V16YW36/UW36) – Electrical, Switches, Sensors & Components 1 All Options
  • 2016 VEGAS ALL OPTIONS (V16GB36) – Electrical, Switches, Sensors & Components All Options
  • 2016 VISION ALL OPTIONS (V16SW36) – Electrical, Switches, Sensors & Components 2 All Options
  • 2017 CROSS COUNTRY/TOURING ALL OPTIONS (V17XDAAA/XTAAA) – Electrical, Switches, Sensors & Components 1 All Options
  • 2017 GUNNER ALL OPTIONS (V17CGAA/CGBA) – Electrical, Switches, Sensors & Components All Options
  • 2017 HAMMER S ALL OPTIONS (V17CHRAB) – Electrical, Switches, Sensors & Components All Options
  • 2017 HIGH BALL ALL OPTIONS (V17CWAAB/CWBAB) – Electrical, Switches, Sensors & Components All Options
  • 2017 JUDGE INTL (V17CJAABEM) – Electrical, Switches & Sensors & Components
  • 2017 MAGNUM/MAGNUM X-1 ALL OPTIONS (V17XMA/XMX) – Electrical, Switches, Sensors & Components 1 All Options
  • 2017 VEGAS ALL OPTIONS (V17CVBAB) – Electrical, Switches, Sensors & Components All Options
  • 2017 VISION ALL OPTIONS (V17VTAAV) – Electrical, Switches, Sensors & Components 2 All Options

Related products

Sours: https://www.victoryonly.com/product/ecm-victory-motorcycle-2008-2017/

Motorcycles ecm

Covid Update 03/11/2020

Hi,
     Just want to let everyone know that during the new lockdown starting this week, we will continue to provide our services to all key workers and anyone who needs to keep their bikes running during this difficult time.

Stay safe

Eric
ECM Motorcycles

Hi,

I thought I should update everyone on our current status. 

We are open and intend to continue as long as possible. We want to be able to support ‘Key Workers’ to enable them to get around and continue their invaluable work and to do this we are offering them a discount on our already low labour rates.

As far as our working environment is concerned, I am a ‘one man band’, I work on my own in the workshop so I will not be infecting anyone at work. When bikes are dropped off, I maintain ‘Social Distancing’ of at least two meters, to keep myself and my customers safe.

We are here to help everyone make the best of the enforced time off and get those jobs sorted ready for a full return to activity we all love.
It has been the subject of much discussion on the internet about whether or not we should continue to ride. I feel that keeping ourselves covered (Helmet & gloves etc) and NOT congregating in groups, large OR small, will reduce the risk of spreading the infection.                                                                         
Although motorcycling is a generally social activity, in the current situation I feel we should keep everyone as safe as possible but also, we should not forget the mental health benefits’, when you consider the benefits of motorcycling, the fresh air and the surge of endorphins that riding provides. 

Stay Safe, Stay Well (Mentally as well as physically)
Eric
ECM Motorcycles.

Good motorcycles combine power and appearance. 

The pleasure you get from riding your motorcycle or scooter depends on its reliability.

Our business is geared to ensuring that you can ride safely and comfortably, so why not put your motorcycle in the hands of our trusted professional who will treat your pride and joy with the care and attention it deserves, with over 30 years experience your motorcycle is in safe hands.

We will take the very best care of your motorcycle no matter the make or model, however we pride ourselves in being BMW & Triumph specialists.

Please feel free to contact us to discuss your needs and the range of services we can provide based on our extensive experience.

Sours: https://www.ecm-motorcycles.co.uk/
Reading and Resetting Car/Motorcycle ECU Sensors feed \u0026 Malfunction Codes via OBD Scanner

.

Similar news:

.



674 675 676 677 678